We will help you achieve your electronic plans.
Any project. Any budget.
Place of Origin: | U.S.A |
Brand Name: | Agilent |
Certification: | ISO17025 |
Model Number: | N4373C |
Minimum Order Quantity: | 1 set |
---|---|
Price: | Negotiable |
Packaging Details: | Carton |
Delivery Time: | 1~3 Working Days |
Payment Terms: | T/T,Western Union |
Supply Ability: | In Stock |
Brand: | Agilent | Module Name: | N4373C |
---|---|---|---|
Number Of Averages: | 1 | Output Power: | -8 DBm |
DUT Signal: | ≤ 0.1/IF-BW | Specified Temperature Range: | +20 °C To +26 °C |
Modulation Frequency Range: | 10 MHz To 40/50/65 GHz |
General Information of Agilent N4373C Lightwave Component Analyzer
Agilent's N4373C Lightwave Component Analyzer (LCA) offers a modulation bandwidth of 50/67 GHz which makes it the ideal choice to develop and characterize electro-optical components, for the upcoming 40G/10GbE as defined in IEEE802.3ba.
Accuracy
For these modern optical transmission systems with advanced modulation schemes it is key for the electro-optical components to have very flat S21 transfer function in amplitude and delay. This performance can be achieved only with electro-optical S-parameter test as provided by the N4373C LCA.
In addition fast, accurate, repeatable and traceable characterization of these electro-optical components, like lasers, modulators and detectors is required, to guarantee the performance with respect to modulation bandwidth, jitter, gain, and distortion.
By optimizing the electrical and the optical design of the N4373C for lowest noise and ripple, the accuracy has been improved by more than a factor of 2, compared to its predecessor, the 86030A 50GHz LCA. This increased accuracy improves the yield from tests performed with the N4373C by narrowing margins needed to pass the tested devices.
This advanced design together with temperature-stabilized transmitter and receiver ensures repeatable measurements over hours without recalibration.
Turn-key solution
The fully integrated "turn-key" N4373C helps reduce time to market, compared to the time-consuming development of a self-made setup. In addition you get a fully specified easy transferable and reliable test instrument. With guaranteed specifications Agilent takes the responsibility to provide you with accurate and traceable test results that can only be achieved in a turn-key solution.
High productivity
The N4373C achieves fast measurements by including the E8361/63C Performance Network Analyzer. A unique new calibration concept significantly reduces setup time to a maximum of several minutes, depending on the selected measurement parameters. This results in increased productivity in R&D or on the manufacturing floor.
Using the advanced measurement capabilities of the network analyzer, all S-parameter related characteristics of the device under test, like responsivity and 3 dB-cutoff frequency, can be qualified with the new N4373C Lightwave Component Analyzer from 10 MHz to 40/50/67 GHz.
Network analyzer
The N4373C LCA is based on the new E8361/63C or the newest N5245A network analyzer with an identical and well known user interface across all Agilent network analyzers.
Lightwave Component Analyzer Software Version 2.3
With up to 67 GHz modulation frequency range and excellent accuracy, the N4373C supports S-parameter test of electro-optical components for IEEE 802.3ba transmission systems, as well as Radio over Fiber (RoF) and aerospace and defense (A&D) applications in the 60 GHz frequency range.
Fastest time to market can be achieved by testing electro-optical S-Parameter with the N4373C and lets you focus on developing your high performance components.
Quick and easy measurement setup increases productivity as time-consuming electrical calibration steps are automated and optical calibration by the operator is no longer necessary.
Additional Benefits:
Transmitter and Receiver Specifications of Agilent N4373C Lightwave Component Analyzer
Optical test set | Option -302, -303, -314,-392, -393, -394, Exx options typical | |
Operation frequency range | Option -302/ -392/-E92 | 10 MHz to 67 GHz |
Option -303/ -393/-E93 | 10 MHz to 40 GHz | |
Option -314/ -394/-E94 | 10 MHz to 50 GHz | |
Connector type | Connector type | SMF angled with Agilent versatile connector interface |
Optical output | ||
Optical source input (rear) | PMF angled, with Agilent versatile connector interface, polarization orientation aligned with connector key | |
RF | 1.85 mm male (-302, -392) | |
2.4 mm male (-303, -314, -393, -394) | ||
LCA optical input | ||
Operating input wavelength range | 1290 nm to 1610 nm4 | |
Maximum linear average input power1 | Optical input 1 | +4 dBm @ 1310 nm |
+5 dBm @ 1550 nm | ||
Optical input 2 | +14 dBm @ 1310 nm | |
+15 dBm @ 1550 nm | ||
Maximum safe average input power | Optical input 1 | +7 dBm |
Optical input 2 | +17 dBm | |
Optical return loss (typical)1 | > 25 dBo | |
Average power measurement range1 | Optical input 1 | -25 dBm to +5 dBm on optical input1 |
Optical input 2 | 15 dBm to +15 dBm on optical input2 | |
Maximum safe average input power | Optical input 1 | +7 dBm |
Optical input 2 | +17 dBm | |
Optical return loss (typical)1 | > 25 dBo | |
Average power measurement range1 | Optical input 1 | -25 dBm to +5 dBm on optical input 1 |
Optical input 2 | -15 dBm to +15 dBm on optical input 2 | |
Average power measurement uncertainty (typical)1 | ± 0.5 dBo | |
LCA optical output (Internal source) | ||
Optical modulation index (OMI) (typical) |
> 5% @ -8 dBm RF power @ 1 GHz modulation frequency | |
Output wavelength | Option -100, -102 | (1310 ± 20) nm |
Option -101, -102 | (1550 ± 20) nm | |
Average output power range | -1 dBm to +5 dBm @ 1550 nm | |
-2 dBm to +4 dBm @ 1310 nm | ||
Average output power uncertainty (typical)2 | ± 0.5 dBo | |
Average output power stability, 15 minutes (typical) | ± 0.5 dBo | |
External optical source input (-050) | ||
Recommended optical input power3 | +8 to +15 dBm | |
Optical input power damage level | +20 dBm | |
Typical loss at quadrature bias point | 9 dB | |
Operating input wavelength range | 1290 nm to 1610 nm4 | |
LCA RF test port input | ||
Maximum safe input level at port A or B | +15 dBm RF, 7V DC |
Ordering Information of Agilent N4373C Lightwave Component Analyzer
The N4373C consists of an optical test set and an electrical network analyzer which are mechanically connected. To protect your network analyzer investment, Agilent offers the integration of an already owned PNA with the optical test set as listed below.
N4373C LCA ordering options | |
Network-analyzer options | |
N4373C-302 | 67 GHz, 2 port PNA (E8361C-014) |
N4373C-303 | 40 GHz, 2 port PNA (E8363C-014) |
N4373C-314 | 50 GHz 4 port PNA-X (N5245A-400) |
Network-analyzer integration options | |
N4373C-392 |
|
N4373C-393 |
|
N4373C-394 |
|
N4373C-E92 | Integration of E8361A/C with other than above options. 1 (All specifications are typical) |
N4373C-E93 | Integration of E8363A/C or E8364A/C with other than above options. 1 (All specifications are typical) |
N4373C-E94 | Integration of N5244A or N5245A with 4 ports other than above options. 1 (All specifications are typical) |
Optical wavelength options | |
N4373C-100 | 1310 nm source optical test set |
N4373C-101 | 1550 nm source optical test set |
N4373C-102 | 1310 nm and 1550 nm source optical test set |
Configuration independent options | |
N4373C-010 | Time domain operation for network analyzer |
N4373C-050 | Testset with external optical source Input |
N4373C-021 | Straight fiber interface single mode |
N4373C-022 | Angled fiber interface single mode |
Warranty options | |
R-51B-001-3C | 1-year return-to-Agilent warranty extended to 3-years |
R-51B-001-5C | 1-year return-to-Agilent warranty extended to 5-years |
Calibration options | |
R-50C-011-3 | Agilent calibration plan, 3 year coverage |
R-50C-011-5 | Agilent calibration plan, 5 year coverage |
FAQ:
1. Can you ship the order to Canada or Australia?
Yes, we can. We send orders worldwide.
2. What delivery method do you use ? and delivery time?
We can ship by EMS, DHL, FedEx, UPS, and TNT with tracking numbers. The usual delivery time is 4-7 workdays.
3. What is your payment term?
100% T/T payment before shipment.
4. How can I ask any other question?
You can contact us online or leave us messages below.
Contact Person: Huxley
Tel: +8613760266785