products details
|
Rohde and Schwarz RTO1044 Digital Oscilloscope 4 GHz bandwidth 4 channels excellent signal fidelity 106 waveforms/sec and up to 16-bit vertical resolution
| Brand Name: | Rohde and Schwarz |
| Model Number: | RTO1044 |
| MOQ: | 1 set |
| Price: | Negotiation |
| Payment Terms: | T/T |
Rohde and Schwarz RTO1044 oscilloscope 4 GHz bandwidth
,4-channel digital oscilloscope 16-bit resolution
,mixed signal oscilloscope excellent signal fidelity
Rohde and Schwarz RTO1044 Digital Oscilloscope 4 GHz bandwidth 4 channels excellent signal fidelity 106 waveforms/sec and up to 16-bit vertical resolution
Description of Rohde and Schwarz RTO1044 Digital Oscilloscope
The R&S RTO1044 Oscilloscope combines excellent signal fidelity, high acquisition rate and the world's first realtime digital trigger system with a compact device format, with a frequency of 4 GHz. It offers hardware-accelerated measurement and analysis functions as well as an advanced user interface that actually makes this instrument fun to work with.
R&S RTO oscilloscopes combine excellent signal fidelity, high acquisition rate and the world's first realtime digital trigger system with a compact device format in the 600 MHz to 4 GHz class. They offer an extensive set of measurement and analysis functions. The fully optimized touchscreen operation is amazingly simple.
R&S RTO oscilloscopes are optimized to perform precise measurements at a high input sensitivity and very low inherent noise. With an acquisition rate of one million waveforms per second, R&S RTO oscilloscopes detect signal faults lightning fast. The world's only realtime digital trigger system precisely correlates the trigger event to the measurement signal. R&S RTO oscilloscopes are equipped with over 90 measurement functions for debugging complex designs. Rare signal faults are found using the rapid mask test or the powerful FFT analysis function. The history function can be used to look back in time to identify the actual cause of a fault. For challenging analysis tasks, the oscilloscopes can be extended with options for protocol decoding, jitter and compliance testing and vector signal analysis. R&S RTO oscilloscopes have been optimized for touchscreen operation, making them easy and intuitive to use
Models:
R&S RTO1044 (4 GHz bandwidth) 4 Channels 20 Gsample/s 20 Msample per channel, max. 800 Msample 1 million waveforms per second 400 MHz bandwidth, 5 Gsample/s sampling rate, 200 Msample memory depth
R&SRTO1024 (2 GHz bandwidth) 4 Channels 10 Gsample/s R&S®RTO1022 (2 GHz bandwidth) 2
R&S RTO1014 (1 GHz bandwidth) 4 Channels
R&S RTO1012 (1 GHz bandwidth) 2 Channels
R&S RTO1004 (600 MHz bandwidth) 4 Channels
R&S RTO1002 (600 MHz bandwidth) 2 Channels
Specifications and Key Features of the Rohde & Schwarz RTO1044 include:
-
4 GHz
-
4 Channels
-
20 GS/s Sample Rate
-
MSO Option for 16 digital channels
-
Highly accurate real time digital trigger
-
Find signal faults fast
-
Hardware accelerated analysis
-
Straightforward, smart menu structure
-
Low noise, high dynamic range
-
Integrated serial data trigger and decode
-
LAN and USB Standard, Optional GPIB
-
million waveforms per second waveform acquisition rate
-
Unprecedented processing ASIC
-
Deepest standard memory depth of up to 80 MSa per channel (depending on the instrument type)
-
Innovative and advanced digital realtime trigger system
-
Excellent measurement accuracy and high measurement speed, even for complex analysis functions
-
Lowest noise in its class
-
Easy and intuitive to operate
-
High-quality line of probes
Technical Specifications:
| Vertical system | |
| Analog bandwidth (–3 dB) at 50 Ω input impedance |
≥ 4 GHz |
| Analog bandwidth (–3 dB) at 1 MΩ input impedance |
≥ 500 MHz (meas.) |
| Input impedance | 50 Ω ± 2% 50 Ω ± 1.5% from 15 °C to 30 °C) 1 MΩ ± 1% [15 pF (meas.)] |
| Vertical resolution | 8 bit, 16 bit for high resolution decimation (with reduction of the sampling rate) 16 bit for high definition mode (without reduction of the sampling rate, requires the option RTO-K17) |
| DC gain accuracy offset and position set to 0 V, after self-alignment |
at 50 Ω, input sensitivity > 5 mV/div: ± 1.5% at 50 Ω, input sensitivity ≤ 5 mV/div: ± 2% at 1 MΩ: ± 2% |
| Input coupling | 50 Ω: DC, GND 1 MΩ: DC, AC and GND |
| Input sensitivity | at 50 Ω: 1 Mv/div to 1 V/div 1 MΩ: 1 mV/div to 10 V/div |
| Maximum input voltage | at 50 Ω: 5 V (RMS) at 1 MΩ: 150 V (RMS), 200 V (Vp), derates at 20 dB/decade to 5 V (RMS) above 250 kHz |
| Acquisition system | |
| Realtime sampling rate (max.) | Max. 10 Gsample/s on 4 channels Max. 20 Gsample/s on 2 channels |
| Realtime waveform acquisition rate | Maximum: > 1,000,000 waveforms/s |
| Memory depth | Standard: 20 Msample on 4 channels, 40 Msample on 2 channels, 80 Msample on 1 channel with option B101: 50 Msample on 4 channels, 100 Msample on 2 channels, 200 Msample on 1 channel with option B102: 100 Msample on 4 channels, 200 Msample on 2 channels, 400 Msample on 1 channel with option B103: 200 Msample on 4 channels, 400 Msample on 2 channels, 800 Msample on 1 channel Option B104: 400 Msample on 4 channels, 800 Msample on 2 channels (restriction: 400 Msample on 2 channels when Ch1 and Ch2 or Ch3 and Ch4 are turned on), 800 Msample on 1 channel |
| Waveform streams per channel | up to 3 with independent selection of decimation mode and waveform arithmetic |
| Sampling modes | Realtime mode: max. sampling rate set by digitizer Interpolated time: Enhancement of sampling resolution by interpolation; max. equivalent sampling rate is 4 Tsample/s Equivalent time: Enhancement of sampling resolution by repetitive acquisition; max. equivalent sampling rate is 4 Tsample/s |
| Interpolation modes | Linear, sin(x)/x, sample&hold |
| Ultra segmented mode | Continuous recording of waveforms in acquisition memory without interruption due to visualization; blind time between consecutive acquisitions less than 300 ns |
| Display characteristics | |
| Display type | 10.4 in. LC TFT color display with touchscreen |
| Display resoluiton | 1024 x 768 pixel (XGA) |
| Diagram types | Yt, XY, spectrum, long-term measurement |
| Display interface configuration | Display area can be split up intoseparate diagram areas by dragging and dropping signal icons Each diagram area can hold any number of signals Diagram areas may be stacked on top of each other and later accessed via the dynamic tab menu |
| Signal bar | Accommodates timebase settings, trigger settings and signal icons Signal bar may be docked to left or right side of display area or hidden |
| Signal icon | Each active waveform is represented by a separate signal icon on the signal bar; the signal icon displays the individual vertical and acquisition settings; a waveform can be minimized to its signal icon so that it appears as a realtime preview in miniature form; dialog boxes and measurement results may also be minimized to a signal icon |
| Axis label | X-axis ticks and Y-axis ticks labeled with tick value and physical unit |
| Diagram label | Diagrams may be individually labeled with a descriptive user-defined name |
| Diagram layout | Grid, crosshair, axis labels and diagram label may be switched on and off separately |
| Persistence | 50 ms to 50 s, or infinite |
| Zoom | User-defined zoom window provides vertical and horizontal zoom; each diagram area supports multiple zoom windows; touchscreen interface simplifies resize and drag operations on zoom window |
| Signal colors | Predefined or user-defined color tables for persistence display |
| General characteristics | |
| Temperature | Operating: 0 °C to +45 °C Storage: -40 °C to +70 °C |
| Temperature loading | In line with MIL-PRF-28800F section 4.5.5.1.1.1 class 3 tailored to +45°C for operation |
| Climatic loading | +25° C/+40 °C at 85% rel. humidity cyclic, in line with IEC 60068-2-30 |
| Altitude | Operating: Up to 3000 m above sea level Non operating: Up to 4600 m above sea level |
| Power supply | 100 V to 240 V at 50 Hz to 60 Hz and 400 Hz, max. 5.5 A to 2.3 A, in line with MIL-PRF28800F section 3.5 |
| Power consumption | 450 W max. |
| Safety | In line with IEC 61010-1, EN 61010-1, CAN/CSA-C22.2 No. 61010-1-04, UL 61010-1 |
| Dimensions (W x H x D) |
427 mm × 249 mm × 204 mm (16.81 in × 9.80 in × 8.03 in) |
| Weight (without options) | 9.6 kg (21.16 lb) |
FAQ:
1.Can you ship order to Canada or Australia ?
Yes,we can .We send orders worldwide .
2. What delivery method do you use ? and delivery time ?
We can ship by EMS,DHL,FedEx,UPS,TNT with tracking number. Usual delivery time is 4-7 workdays.
3. What is your payment term?
100% T/T payment before shipment.
4. How can I ask any other question ?
You can contact us online or leave us messages below.
