products details

Home Products

Portable Keysight FieldFox Handheld Signal Analyzer with 26.5 GHz Frequency 120 MHz Real-Time Bandwidth and GPS/GNSS Geolocation

Brand Name:	Keysight
MOQ:	1 set

Detail Information

Highlight:

Agilent N9918B FieldFox Handheld Signal Analyzer

Product Description

Portable Keysight Agilent N9918B FieldFox Handheld Signal Analyzer 26.5 GHz

Product Overview

Portable Keysight (Agilent) N9918B FieldFox Handheld Signal Analyzer, 26.5GHz

26.5 GHz max frequency
Cable and Antenna Analyzer (CAT) included in standard models
The 120 MHz gap-free real-time bandwidth enables you to capture signals that were previously difficult to capture
The 115 dB dynamic range enables you to measure all four S-parameters simultaneously
Accurate spectrum analyzer measurements (± 0.3dB) without preheating
Air interface measurements for 5G NR and LTE can be performed
Provides geolocation and time stamp using GPS/GNSS
Weighing just 3.4 kg (7.4 lb), it is very portable

Technical Specifications

Maximum Frequency	26.5 GHz
Other CAT/VNA Features	Mixed-Mode S-Parameters, DTF/TDR Cable Measurements, Vector Voltmeter
Applications	AM/FM Tune and Listen, Cable and Antenna Analysis, Field Strength Measurement, SCPI Code Compatibility, Spectrogram, Stimulus Response, 89600 VSA Software, Over-The-Air LTE FDD and 5GTF 5G NR
Best Speed at 1001 Point, 1 Sweep	171 us/pt
SA Start Frequency	5 kHz
System Dynamic Range	> 114 dB
Additional Spectrum Analyzer Features	Real-Time Spectrum Analysis, Noise Figure Measurements, Over-The-Air Measurements, Built-In Power Meter, Extended Range Transmission Analysis (ERTA)
Output Power	8 dBm
Number of Built-In Ports	2 ports
Instrument Type	Combination Analyzer
Cable and Antenna Analyzer	Yes - Standard
Spectrum Analyzer	Yes - Optional
Vector Network Analyzer	Yes - Optional
Measuring Functions	Network analysis, Signal analysis, Cable and antenna tester, Real-time spectrum analysis
Overall Amplitude Accuracy	±0.2 dB
Type	Handheld
System Features	GPS Receiver - Internal Only, Remote Control Capability, Built-In DC Source
Standard Attenuator Range	40 dB
Standard Attenuator Step	5 dB
DANL @1 GHz	-163 dBm
Maximum Analysis Bandwidth	120MHz
Maximum Real-Time Bandwidth	120MHz
Phase Noise @1 GHz (1 MHz offset)	-124dBc/Hz
Phase Noise @1 GHz (10 kHz offset)	-117 dBc/Hz
Phase Noise @1 GHz (30 kHz offset)	-115 dBc/Hz
TOI @1 GHz (3rd Order Intercept)	+11dBM
Bandwidth	110 MHz
Bandwidth Options	10 MHz, 40 MHz, 120 MHz
CAT/VNA Start Frequency	30 kHz
Track Noise	0.0008 dB rms

Available Options

Option Code	Description
010	Vector network analyzer time domain
030	Remote Control Capability
208	USB Power Sensor Measurements Versus Frequency
209	Extended Range Transmission Analysis (ERTA)
211	Vector network analyzer full 2-port S-parameters
212	1-port mixed-mode S-parameters
215	TDR cable measurements
233	Spectrum analyzer
235	Pre-amplifier
236	Interference analyzer and spectrogram
238	Spectrum Analyzer Time Gating
302	USB power sensor support
307	GPS Receiver
308	Vector voltmeter
309	DC Bias Variable Voltage Source
310	Built-in Power Meter
312	Channel Scanner
320	Reflection measurements (return loss, VSWR and scalar measurements)
330	Pulse Measurements
350	Real-time Spectrum Analyzer (RTSA)
351	I/Q Analyzer (IQA)
355	Analog Demodulation
356	Noise Figure measurements
370	Over the air LTE FDD measurements
377	Over the air 5G TF measurements
378	Over-the-air (OTA) 5G NR measurements
352	Indoor and outdoor mapping
358	EMF measurements
371	Over the air LTE TDD measurements
361	EMI measurements
353	IQ streaming
1A7	Calibration + Uncertainties + Guardbanding (Not Accredited)
A6J	ANSI Z540-1-1994 Calibration
UK6	Commercial calibration certificate with test data
B04	Bandwidth, 40 MHz
B10	Bandwidth, 100 MHz