Pre-Owned Rohde And Schwarz ESPI7 EMI Test Receiver 9 kHz to 7 GHz CISPR-conforming EMI Precompliance Receiver

Working Rohde and Schwarz ESPI7 EMI Test Receiver 9 kHz to 7 GHz calibrated EMI Precompliance Receiver

Manufacturer: Rohde & Schwarz

Model: ESPI7

Frequency Range: 9 kHz - 7 GHz

The R&S ESPI7 Test Receiver implements many benefits of the Rohde & Schwarz full-compliance EMI test receivers for the precompliance class. When equipped with option R&S ESPI-K50, the ESPI7 can be used to measure the field-strength profiles of radio communications and broadcast networks.

Due to a common platform system, the R&S ESPI7 offers the additional benefits of the R&S FSP spectrum analyzers. These benefits far exceed the capabilities and functions of conventional precompliance test equipment. The R&S ESPI7 defines vital criteria such as functionality, measurement speed and accuracy for middle-end equipment and is especially designed to meet all demands of EMC testing during development.

• EMI diagnostic measurements in development, production, quality assurance, service and maintenance
• Pre- and post-certification testing in accordance with all civil EMI standards
• Fast and easy interference testing in mobile use
• Evaluation of field-strength coverage at very high measurement rates
• Use as spectrum analyzer, including with selective input
• Low measurement uncertainty
• Preselection filters and built-in 20 dB preamplifier (option)
• Unprecedented measurement speed (measurement times from 100 µs)
• Low noise level (NF = 12 dB with preamplifier)
• Programmable scan tables with up to 10 subranges
• Predefined limit lines and correction factors
• Transducer factors and transducer sets
• Autoranging and overload detection
• Built-in AF demodulator and loudspeaker
• USB interface, WinXP embedded
• Bright 21 cm TFT color display
• Battery or AC supply operation

• Optional built-in preselection and 20 dB preamplifier
• Weighting with peak average, quasi-peak, RMS and CISPR average detectors (max. three detectors simultaneously)
• CISPR-conforming EMI measurement bandwidths: 200 Hz, 9 kHz, 120 kHz, 1 MHz
• Correct pulse weighting in line with CISPR 16-1-1 from 10 Hz pulse repetition frequency
• Internal test routines for automated or interactive preview & final EMI measurements
• Evaluation functions for prescan, data reduction (peak list) and final measurement
• For all civil EMI standards such as CISPR, EN, ETS, FCC, ANSI C63.4, VCCI and VDE

• Resolution bandwidths from 10 Hz to 10 MHz (in steps of 1/3/10)
• RMS detector for measurements on digitally modulated signals
• Channel filter bandwidths from 100 Hz to 5 MHz as standard
• Test routines for determining TOI, ACPR, OBW, amplitude statistics

• External trigger input
• Additional channel filters with bandwidths of 5.6 MHz to 8 MHz for DVB-T, ISDB-T and ATSC signals
• Very high sample rate (>100 ksamples/s on a discrete frequency)
• Measurement on channel list (max. 1000 channels)
• AM/FM modulation analysis (option R&S FSP-K7)