Send Message
Tel:
Shenzhen Meigaolan Electronic Instrument Co. Ltd
Shenzhen Meigaolan Electronic Instrument Co. Ltd

We will help you achieve your electronic plans.

Any project. Any budget.

Home ProductsRF Spectrum Analyzer

Portable Rohde & Schwarz FSH6 Handheld Spectrum Analyzer 100 Khz To 6.0 GHz

Portable Rohde & Schwarz FSH6 Handheld Spectrum Analyzer 100 Khz To 6.0 GHz

  • Portable Rohde & Schwarz FSH6 Handheld Spectrum Analyzer 100 Khz To 6.0 GHz
  • Portable Rohde & Schwarz FSH6 Handheld Spectrum Analyzer 100 Khz To 6.0 GHz
  • Portable Rohde & Schwarz FSH6 Handheld Spectrum Analyzer 100 Khz To 6.0 GHz
  • Portable Rohde & Schwarz FSH6 Handheld Spectrum Analyzer 100 Khz To 6.0 GHz
Portable Rohde & Schwarz FSH6 Handheld Spectrum Analyzer 100 Khz To 6.0 GHz
Product Details:
Brand Name: Rohde & Schwarz
Model Number: FSH6
Payment & Shipping Terms:
Minimum Order Quantity: 1 set
Price: Negotiation
Payment Terms: T/T
Supply Ability: in stock
Contact Now
Detailed Product Description
Product Name: Handheld Spectrum Analyzer Frequency Range: 6GHz
Condition: Pre-Owned Functions: Tested, In Full Working Conditions
Portable: Yes Tracking Generator Output: None
Preamp: Yes Resolution Bandwidth: 100 Hz To 1 MHz
High Light:

FSH6 Handheld Spectrum Analyzer

,

100 Khz To 6.0 GHz Handheld Spectrum Analyzer

Rohde & Schwarz FSH6 Handheld Spectrum Analyzer 100 Khz to 6.0 GHz

Description of Rohde & Schwarz FSH6

 

The Rohde & Schwarz FSH6 spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Rohde & Schwarz FSH6. The CRT displays received signal strength (y-axis) against frequency ( x-axis).
 
Some applications for Rohde & Schwarz FSH6 Spectrum Analyzers include Site Monitoring: Verify that the frequency and signal strength of your transmitter is accurate. Interference: Before a system is installed you use a Rohde & Schwarz FSH6 spectrum analyzer to verify that the frequencies (you plan to use) are not occupied or if the presence of a very strong signal will interfere with your new setup. Interference can be created by a number of different situations. Other tests that utilize the Rohde & Schwarz FSH6 spectrum analyzer features include antenna isolation, co-channel interference, adjacent channel power, occupied bandwidth, intermodulation, microwave or satellite antenna alignment, and characterization of components.
 
The FSH is the ideal spectrum analyzer for rapid, high-precision, cost-effective signal investigations. It provides a large number of measurement functions and so can handle anything from the installation or maintenance of a mobile radio base station up to on-site fault location in RF cables as well as development and service -an extensive range of applications. Due to its excellent characteristics, the FSH is used on board the International Space Station (ISS) for distance-to-fault measurements on RF antenna cables

 

Features

  • Frequency range 100 kHz to 6 GHz
  • Internal preamplifier with frequency range from 100 kHz to 6 GHz
  • Displayed average noise level typ. -135 dBm (RBW 100 Hz)
  • 0.5 dB typ. level accuracy up to 6 GHz
  • Resolution bandwidths 100 Hz to 1 MHz, 1 and 3 steps
  • Wide range of detectors: sample, max/min peak, auto peak, RMS

specification

  • Resolution:1Hz
  • Counter Accuracy:S/N > 25 dB  ± (frequency × reference frequency error)
  • Frequency Span:model .06/.26 0Hz, 100 Hz to 6 GHz
  • SSB phase noise:f = 500 MHz,+20 °C to +30 °C
  • 30 kHz from carrier:<–85 dBc (1 Hz)
  • 100 kHz from carrier:<–100 dBc (1 Hz)
  • 1MHz from carrier:<–120 dBc (1 Hz)
  • Sweep Time:span=0 Hz 1 ms to 100 s span>0 Hz 20 ms to 1000 s, min. 20 ms/600 MHz
  • Resolution bandwidths (–3 dB):model .03/.23,model .06/.26/.18 :in addition 100 Hz, 300 Hz
  • Tolerance:≤300 kHz  ±5 %, nominal 1 MHz :±10 %, nominal
  • Video Bandwidths:10 Hz to 1 MHz in 1, 3 steps
The FSH performs time-domain power measurements within a timeslot of TDMA (time division multiple access) methods. All the settings required for the GSM and EDGE standards are predefined to make these measurements easier for the user. In addition, up to five user-definable instrument setups can be loaded into the FSH using the FSH View software
 
Channel-Power Measurements
The channel-power measurement function is for determining the power in a transmission channel specified by the user. After a few preliminary settings have been made, a single keystroke starts the FSH's spectrum measurement inside the channel, using a resolution bandwidth that is small relative to the channel bandwidth. The FSH then integrates the measured values indicated by the trace to obtain and display the total power. All the settings required for the digital mobile radio standards 3GPP WCDMA, cdmaOne, CDMA2000 1x are predefined ready for use. The FSH also takes the characteristics of the selected display mode (lin or log), the selected detector and the resolution bandwidth into account so that the result accuracy is comparable to that obtained with a thermal power meter.
 
Measurements on Cables (distance-to-fault)
For rapid and accurate determination of the distance to any faults in an RF cable. Distance-to-fault measurements using the VSWR Bridge FSH-Z2 give an immediate overview of the state of the device under test (return loss and distance). The marker-zoom function allows detailed analysis of faults with a resolution of up to 1024 pixels.
Requires FSH313/323/626 (with built-in tracking generator), option FSH-B1 (distance-to-fault measurement) and FSH-Z2 (VSWR bridge and power divider).
 
Scalar Network Analysis
The FSH313/323/626 (with built-in tracking generator) can be used to determine the transmission characteristics (i.e. attenuation or gain) of two ports such as cables, filters, amplifiers, etc, rapidly and with a minimum of effort. A simple calibration procedure compensates for the attenuation introduced by measurement cables or any attenuators used for amplifier measurements. When the VSWR Bridge FSH-Z2 is attached, the matching (return loss or VSWR) at the input or output of two ports can be determined as well as their transfer function. The bridge is screwed directly onto the RF input and tracking generator output, and no extra or cumbersome cabling is required.
 
 

FAQ: 

1.Can you ship order to Canada or Australia ?

    Yes,we can .We send orders worldwide .

2. What delivery method do you use ? and delivery time ?

    We can ship by EMS,DHL,FedEx,UPS,TNT with tracking number. Usual delivery time is 4-7 workdays.

3. What is your payment term?

    100% T/T payment before shipment.

4. How can I ask any other question ?

    You can contact us online or leave us messages below.

 

Portable Rohde & Schwarz FSH6 Handheld Spectrum Analyzer 100 Khz To 6.0 GHz 0

 

Portable Rohde & Schwarz FSH6 Handheld Spectrum Analyzer 100 Khz To 6.0 GHz 1

Portable Rohde & Schwarz FSH6 Handheld Spectrum Analyzer 100 Khz To 6.0 GHz 1

Portable Rohde & Schwarz FSH6 Handheld Spectrum Analyzer 100 Khz To 6.0 GHz 3

 

Contact Details
Shenzhen Meigaolan Electronic Instrument Co. Ltd

Contact Person: Cece

Tel: +8613480167449

Send your inquiry directly to us
Shenzhen Meigaolan Electronic Instrument Co. Ltd
RA1-B2,F32 of Dongjianghaoyuan, Baomin Rd, Bao'an District, Shenzhen,China
Tel:86-755-27883980
Mobile Site Privacy Policy | China Good Quality RF Spectrum Analyzer Supplier. © 2023 - 2024 rf-spectrumanalyzers.com. All Rights Reserved.