products details
|
Benchtop Analog RF Signal Generator Keysight Agilent E8257D PSG
| Brand Name: | Keysight (Agilent) |
| Model Number: | E8257D |
| MOQ: | 1 set |
| Price: | Negotiation |
| Payment Terms: | T/T |
Detail Information
Place of Origin:
Malaysia
Product Name:
PSG Analog Signal Generator
Frequency:
100 KHz To 67 GHz
Form Factor:
Benchtop/Rackmount ( K45)
Type:
Analog ( /007 )/Microwave/Digital/RF ( /H20 )
Condition:
Pre-Owned
Functions:
Tested, In Full Working Conditions
Supply Ability:
in stock
Highlight:
Benchtop RF Signal Generator
,Analog RF Signal Generator
,E8257D RF Analog Signal Generators
Product Description
Keysight Agilent E8257D PSG Analog Signal Generator 100 KHz To 67 GHz
Description of Keysight Agilent E8257D
The Keysight E8257D is a fully-synthesized signal generator with high output power, low phase noise, and modulation capability. Specifications apply over a 0 to 55 °C range, unless otherwise stated, and apply after a 45 minute warm-up time. Supplemental characteristics, denoted as typical, nominal, or measured, provide additional (non-warranted) information at 25 °C, which may be useful in the application of the product.
Overview and Features of E8257D PSG Analog Signal Generator
- Take on your toughest test requirements with metrology-grade frequency and level accuracy, excellent distortion, and spurious characteristics
- Measure across a wide frequency range: 13, 20, 31.8, 40, 50, and 67 GHz models available (1.1 THz with frequency extender)
- Test high-power devices and overcome test system losses with options capable of generating up to 1 W (+30 dBm) of output power
- Get extremely low phase noise: –91 dBc/Hz at 100 Hz offset and –126 dBc/Hz at 10 kHz offset (10 GHz), to address Doppler radar, ADC and receiver-blocking tests
- Characterize devices and circuits by adding AM, FM, PM and pulse modulation to your signa
Modulation
- AM, FM, ØM, pulse, and scan
- Typical 6 ns rise/fall times and 20 ns pulse width
- Dual internal function generators: sine, square, triangular, ramp, and noise
Sweep
- Step, list, and ramp sweep (frequency and power)
- Source control using PSA Series Option 215
- Agilent 8757D scalar network analyzer code compatible
Automation and Communication Interface
- 10BaseT LAN and GPIB
- SCPI and IVI-COM drivers
- Backwards compatible with all PSG signal generators
List of Options
| 004 | Upgraded Processor |
| 007 | Analog ramp sweep |
| 008 | Removable flash memory |
| 030 | Best Value Bundle Discount: Includes Options 1EH, 1EU, UNW |
| 0BV | Service Documentation, Component Level |
| 0BW | Printed Copy of the Assembly-Level Service Guide |
| 1A7 | PSG Series ISO 17025 compliant calibration with test data |
| 1CM | Rackmount flange kit |
| 1CN | Front handle kit |
| 1CP | Rackmount flange with front handle kit |
| 1E1 | Step attenuator |
| 1EA | High RF output power +17dbm (S/N 5110 and older) |
| 1ED | Type-N (f) RF output connector |
| 1EH | Improved harmonics below 2 GHz |
| 1EM | Moves all front panel connectors to the rear panel |
| 1EU | High output power + 30 dbm (S/N: > 5110) |
| 1EZ | Extended Support Life of 5 to 10 years after product discontinuance |
| 1SM | Scan modulation |
| 2E1 | Adds a step attenuator for SN prefix greater than or equal to 4928. |
| 2EH | Adds improved harmonics below 2 GHz for units with Option 1EU or SN prefix greater than or equal to 4928. |
| 2EU | Adds high output power (Option 1EU) for SN prefix less than 4928 without Option 1EA. |
| 2NW | Adds narrow pulse modulation for units with Option 1EU or SN prefix greater than or equal to 4928. |
| 2NX | Adds ultra-low phase noise performance for SN prefix greater than or equal to 4928. |
| 3EU | Adds high output power (Option 1EU) for SN prefix less than 4928 with option 1EA. |
| 520 | 250 kHz to 20 GHz |
| 521 | 10 MHz to 20 GHz, Ultrahigh output power |
| 532 | 250 kHz to 31.8 GHz |
| 540 | 250 kHz to 40 GHz |
| 550 | 250 kHz to 50 GHz |
| 567 | Frequency range from 250 kHz to 67 GHz |
| 707 | Standard adapter set, 3.5mm F to 3.5mm F |
| 708 | Standard adapter set, type-N M to 3.5mm F |
| 709 | Standard adapter set, 2.4 mm |
| 710 | Standard adapter set, 1.85mm F to 1.85mm F |
| 881 | Analog Modulation Suite - includes step attenuator, AM, FM, phase modulation, scan modulation, low frequency generator and narrow pulse modulation |
| A6J | PSG Series ANSI Z540 compliant calibration with test data |
| AB1 | Korea Quick Users Guide (Korean localization) |
| AB2 | China Quick Users Guide (Chinese localization) |
| ABA | Printed Copy of the English Documentation Set |
| ABD | Germany Quick Users Guide (German localization) |
| ABE | Spain Quick Users Guide (Spanish localization) |
| ABF | France Quick Users Guide (French localization) |
| ABJ | Japan Quick Users Guide (Japanese localization) |
| ABZ | Italy Quick Users Guide (Italian localization) |
| AMG | |
| C09 | Moves all connectors to rear panel except RF OUTPUT Connector |
| CD1 | CD-ROM Containing the English Documentation Set |
| H1G | Add 1GHz external phase reference |
| H1K | 100 kHz frequency extension |
| H1S | Add 1 GHz external frequency reference to improve spectral purity |
| H20 | 20 dBm maximum RF output power for CW frequencies 3.2 GHz to 20 GHz, at temperature of 25degC, for instruments with opts 520,1EA,1E1 |
| H23 | +23 dbm power output for frequencies 9GHz, 25degC, option 520,1EA,1E1 |
| H30 | Add internal mixer for up conversion in the 20 to 40 GHz Models |
| H42 | Provides a unique firmware revision and Preset condition |
| H43 | US Air Force TISS program |
| H44 | Frequency range from 250 kHz to 43.5 GHz |
| H5K | Provides inverted EXT1 input with 5000-ohm input impedance instead of 600 ohms |
| H60 | Add internal mixer for up conversion in the 40 to 67 GHz Models |
| H65 | Provides M9D-2065LNV mixer with two 2.4mm F connections on rear panel. RF 65GHz, LO 30GHz with doubler, 22GHz IF |
| HA1 | Improved Phase Noise performance for AFMETCAL |
| HA2 | Specified integrate phase noise for CW at 8.5GHz with offset from 10Hz to 1MHz |
| HA7 | Provides plots of phase noise at 16GHz and 18GHz, and a plot of 2nd harmonics |
| HAR | Improved Phase Noise Below 500 MHz |
| HCC | Provides 250MHz - 10GHz In and Out on the rear panel |
| HE1 | AFMETCAL SSG special |
| HEU | High output power for frequency below 3.2 GHz |
| HNS | Narrow pulse modulation to 31.8 GHz |
| HSM | Add Scan Modulation |
| HY2 | Enhanced Ultra Low Phase Noise Level 2 |
| K45 | 24 inch rack mount slide kit with flange and brackets |
| R-50C-011-3 | Agilent Calibration - 3 years |
| R-50C-011-5 | Agilent Calibration - 5 years |
| R-50C-016-3 | ISO 17025 Compliant Calibration - 3 years |
| R-50C-016-5 | ISO 17025 Compliant Calibration - 5 years |
| R-50C-021-3 | ANSI Z540-1-1994 Calibration - 3 years |
| R-50C-021-5 | ANSI Z540-1-1994 Calibration - 5 years |
| R-51B-001-3C | Return to Agilent Warranty - 3 years |
| R-51B-001-5C | Return to Agilent Warranty - 5 years |
| R-51B-001-C | Return to Agilent Warranty - 1 year |
| R-52A-001-3 | 3 Year Calibration License (Commercial) |
| R-52A-001-L | Lifetime Calibration License (Commercial) |
| R-52A-002-3 | 3 Year Calibration License (Z540/17025) |
| R-52A-002-L | Lifetime Calibration License (Z540/17025) |
| R2C | Core Instrument Firmware Enhancements |
| RMKT | Agilent Refurbished Product (Do Not Use - Certiprime Option) |
| S03 | Oleson Microwave Labs model S03MS-AG 220 - 325 GHz mm source module @ -25 dBm |
| S05 | Oleson Microwave Labs model S05MS-AG 140 - 220 GHz mm source module @ -12dBm |
| S06 | Oleson Microwave Labs model S06MS-AG 110 - 170 GHz mm source module @ -6dBm |
| S08 | Oleson Microwave Labs model S08MS-AG 90 - 140 GHz mm source module @ -2 dBm |
| S10 | Oleson Microwave Labs model S10MS-AG 75 - 110 GHz mm source module @ +5dBm |
| S12 | Oleson Microwave Labs model S12MS-AG 60 - 90 GHz mm source module @ +6dBm |
| S15 | Oleson Microwave Labs model S15MS-AG 50 - 75 GHz mm source module @ +8dBm |
| U01 | 8643A/8644B Programming language capability and bi-directional sweep.F/W C.06.10 or higher |
| U02 | Aeroflex 2040 progamming capability F/W C.06.15 or higher |
| U04 | 8664A/8665A/8665B programming capability F/W C.60.20 or higher |
| UK6 | Commercial calibration certificate and test data |
| UN5 | Standard output power |
| UNC | Standard connector ( 3.5 mm ) |
| UND | Internal dual arbitrary waveform generator |
| UNE | Standard connector, 1.85 mm |
| UNF | No pulse modulation |
| UNG | No AM, FM, and phase modulation |
| UNM | Standard Front and Rear Panel Connector Configuration |
| UNN | No step attenuator |
| UNP | Standard spectral purity |
| UNR | Enhanced phase noise |
| UNT | AM, FM, phase modulation, and LF output |
| UNU | Pulse modulation |
| UNW | Narrow pulse modulation |
| UNX | Ultra-low phase noise performance |
| UNY | Enhanced ultra low phase noise |
FAQ:
1.Can you ship order to Canada or Australia ?
Yes,we can .We send orders worldwide .
2. What delivery method do you use ? and delivery time ?
We can ship by EMS,DHL,FedEx,UPS,TNT with tracking number. Usual delivery time is 4-7 workdays.
3. What is your payment term?
100% T/T payment before shipment.
4. How can I ask any other question ?
You can contact us online or leave us messages below .
Get Best Price
Video
