Send Message
good price online

products details

Created with Pixso. Home Created with Pixso. Products Created with Pixso.
RF Power Sensor
Created with Pixso. Rohde And Schwarz NRP-Z11 Universal Power Sensors, 200 PW To 200 MW, 10 MHz To 8 GHz

Rohde And Schwarz NRP-Z11 Universal Power Sensors, 200 PW To 200 MW, 10 MHz To 8 GHz

Brand Name: Rohde and Schwarz
Model Number: NRP-Z11
MOQ: 1 Piece
Price: Negotiation
Delivery Time: 1~3 Working Days
Payment Terms: T/T, Western Union, MoneyGram
Detail Information
Place of Origin:
Germany
Certification:
CE
Product Name:
USB Power Sensor
Frequency Range:
10MHz-8Ghz
Power Measurements:
-50 DBm To +30 DBm
Condition:
Pre-Owned
Functions:
Tested, In Full Working Conditions
Form Factor:
Plug-In
Packaging Details:
Carton
Supply Ability:
In Stock
Product Description

Rohde and Schwarz NRP-Z11 Universal Power Sensors, 200 pW to 200 mW, 10 MHz to 8 GHz


 
Description of NRP-Z11

 

The Power Sensors R&S NRP-Z11, R&S NRP-Z21, R&S NRP-Z22, R&S NRP-Z23 and R&S NRP-Z24 fuse multiple-path architecture, multiple-diode technology and a simultaneously scanning multichannel measurement system into a unique high-performance concept. Multiple-path architecture means combining two or three diode detectors to obtain a large dynamic range for modulated signals. This is achieved by operating each detector exclusively in the square-law region, and only using the optimally driven detectors for the measurement. Multiple diodes comprise several zero-bias Schottky diodes connected in series and integrated on one chip. When used in an RF detector, they expand its square-law region, because the measurement voltage is split among several diodes – so that each one is driven less – while at the same time the detected voltages of the individual diodes are added.


 
 
Features of NRP-Z11:

 

  • 10 MHz - 8 GHz frequency range
  • 200 pW - 200 mW power
  • The multipath architecture - 3 signal paths, each fitted with triple diodes
  • 6 dB wide overlap ranges, smooth transitions
  • Simultaneous scanning and analysis
  • Chopper stabilization of the signal paths for repetitive signals
  • Advantages over conventional technology include: high signal/noise ratio throughout, low modulation effect, negligible delays and discontinuities when switching signal paths, and the ability to perform a time-domain analysis of the test signal within the available video bandwidth.These sensors not only compete with peak power meters, they are even superior in two respects:No restrictions on the RF bandwidth of the test signal
  • Large dynamic range

 

 

Available options of NRP-Z11:

DCV-1 Documentation of calibration values

 


Our service
One-stop service from manufacture to shipping.
1. Your inquiry related to our products or prices will be replied in 24hours.
2. Well-trained and experienced staffs to answer all your enquires influent English.
3. Distributor ship is offered for your unique desigh and some our current models.
4. Protection of your sales area, ideas of design and all your private information.
 
FAQ

1.Can you ship order to Canada or Australia ?
Yes,we can .We send orders worldwide .
2. What delivery method do you use ? and delivery time ?
We can ship by EMS,DHL,FedEx,UPS,TNT with tracking number. Usual delivery time is 4-7 workdays.
3. What is your payment term?
T/T payment before shipment.
4. How can I ask any other question ?
You can contact us online or leave us messages below.
 Rohde And Schwarz NRP-Z11 Universal Power Sensors, 200 PW To 200 MW, 10 MHz To 8 GHz 0Rohde And Schwarz NRP-Z11 Universal Power Sensors, 200 PW To 200 MW, 10 MHz To 8 GHz 1Rohde And Schwarz NRP-Z11 Universal Power Sensors, 200 PW To 200 MW, 10 MHz To 8 GHz 2

 

 

good price online

Products Details

Created with Pixso. Home Created with Pixso. Products Created with Pixso.
RF Power Sensor
Created with Pixso. Rohde And Schwarz NRP-Z11 Universal Power Sensors, 200 PW To 200 MW, 10 MHz To 8 GHz

Rohde And Schwarz NRP-Z11 Universal Power Sensors, 200 PW To 200 MW, 10 MHz To 8 GHz

Brand Name: Rohde and Schwarz
Model Number: NRP-Z11
MOQ: 1 Piece
Price: Negotiation
Packaging Details: Carton
Payment Terms: T/T, Western Union, MoneyGram
Detail Information
Place of Origin:
Germany
Brand Name:
Rohde and Schwarz
Certification:
CE
Model Number:
NRP-Z11
Product Name:
USB Power Sensor
Frequency Range:
10MHz-8Ghz
Power Measurements:
-50 DBm To +30 DBm
Condition:
Pre-Owned
Functions:
Tested, In Full Working Conditions
Form Factor:
Plug-In
Minimum Order Quantity:
1 Piece
Price:
Negotiation
Packaging Details:
Carton
Delivery Time:
1~3 Working Days
Payment Terms:
T/T, Western Union, MoneyGram
Supply Ability:
In Stock
Product Description

Rohde and Schwarz NRP-Z11 Universal Power Sensors, 200 pW to 200 mW, 10 MHz to 8 GHz


 
Description of NRP-Z11

 

The Power Sensors R&S NRP-Z11, R&S NRP-Z21, R&S NRP-Z22, R&S NRP-Z23 and R&S NRP-Z24 fuse multiple-path architecture, multiple-diode technology and a simultaneously scanning multichannel measurement system into a unique high-performance concept. Multiple-path architecture means combining two or three diode detectors to obtain a large dynamic range for modulated signals. This is achieved by operating each detector exclusively in the square-law region, and only using the optimally driven detectors for the measurement. Multiple diodes comprise several zero-bias Schottky diodes connected in series and integrated on one chip. When used in an RF detector, they expand its square-law region, because the measurement voltage is split among several diodes – so that each one is driven less – while at the same time the detected voltages of the individual diodes are added.


 
 
Features of NRP-Z11:

 

  • 10 MHz - 8 GHz frequency range
  • 200 pW - 200 mW power
  • The multipath architecture - 3 signal paths, each fitted with triple diodes
  • 6 dB wide overlap ranges, smooth transitions
  • Simultaneous scanning and analysis
  • Chopper stabilization of the signal paths for repetitive signals
  • Advantages over conventional technology include: high signal/noise ratio throughout, low modulation effect, negligible delays and discontinuities when switching signal paths, and the ability to perform a time-domain analysis of the test signal within the available video bandwidth.These sensors not only compete with peak power meters, they are even superior in two respects:No restrictions on the RF bandwidth of the test signal
  • Large dynamic range

 

 

Available options of NRP-Z11:

DCV-1 Documentation of calibration values

 


Our service
One-stop service from manufacture to shipping.
1. Your inquiry related to our products or prices will be replied in 24hours.
2. Well-trained and experienced staffs to answer all your enquires influent English.
3. Distributor ship is offered for your unique desigh and some our current models.
4. Protection of your sales area, ideas of design and all your private information.
 
FAQ

1.Can you ship order to Canada or Australia ?
Yes,we can .We send orders worldwide .
2. What delivery method do you use ? and delivery time ?
We can ship by EMS,DHL,FedEx,UPS,TNT with tracking number. Usual delivery time is 4-7 workdays.
3. What is your payment term?
T/T payment before shipment.
4. How can I ask any other question ?
You can contact us online or leave us messages below.
 Rohde And Schwarz NRP-Z11 Universal Power Sensors, 200 PW To 200 MW, 10 MHz To 8 GHz 0Rohde And Schwarz NRP-Z11 Universal Power Sensors, 200 PW To 200 MW, 10 MHz To 8 GHz 1Rohde And Schwarz NRP-Z11 Universal Power Sensors, 200 PW To 200 MW, 10 MHz To 8 GHz 2